PRS594
PRS594 is a popular molded, reinforced profile consisting of a sealing bead and dovetail base design. This cross section is designed to snap into a mating retention system (see retainer tab) and can cover a large gap over a relatively narrow profile width.
Profile Details
Style B
Dimensions Width 2.000 (50.8) Height 1.218 (30.9372) Gap 1.219 (30.9626)
Drawings PDF DWG SAT Standard Operating Pressure Minimum 10.00 psi (0.690 bar) Maximum 35.00 psi (2.413 bar)
Boot Dimensions A 2.000 (50.800) B 3.500 (88.900)
Minimum Straight Length 4.000(101.600)
-
Radial Expansion Out
(D is constant)
D = 18.000 (457.2) -
Radial Expansion In
(OD is constant)
D1 = 18.000 (457.2) -
Axial Expansion
(CL is constant)
D2 = 10.000 (254) -
Radial Expansion Out
(D is constant)
R = 10.000 (254) -
Radial Expansion In
(OD is constant)
R1 = 16.000 (406.4) -
Axial Expansion
(CL is constant)
R2 = 5.000 (127)
Materials
Standard Materials
E6A53 (C/U)
60 Durometer Black FDA-Compliant EPDM With Excellent Flex Life (For All Configurations)
Special Materials (Special Setup Charges May Apply)
36B07 (C/U)
60 Durometer High Quality Black Neoprene (For All Configurations)
47A09 (C/U)
60 Durometer Nitrile Designed for Chemical Resistance and High Cycle Life (For All Configurations)
E603A (C/U)
60 Durometer EPDM for High Quality, High Flex Life Applications (For All Configurations)
S55202 (C)
55 Durometer Gray, FDA-Compliant Silicone Molding Compound (For All Configurations)
Air Connectors
AC3A Reinforced Hose with Crimped Ferrule Adapter
ACFIT Hose Fittings
PI KF03-02 PSMale 1/8-27 NPT Fitting
PDF
AC14 Threaded End Connections
TYPE3.AC14E.PRV8426.906End Connector
PDF
Retainers
Tooling
90RCL
90 Degree Radiused Corner Molds for Axial Expansion. Used with straight legs to mold seal
- PRS594-90RCL-950
- 9.5" (241.30 mm) axial expansion radiused corners. Range of use = 9.0" (228.60 mm) to 10.5" (266.70 mm)
- PRS594-90RCL-500
- 5" (127.00 mm) axial expansion radiused corners. Range of use = 3.5" (88.90 mm) to 6.5" (171.45 mm)
- PRS594-90RCL-350
- 3.5" (88.90 mm) axial expansion radiused corners. Range of use = 3.5" (88.90 mm) to 5" (127.00 mm)
180CL
180 Degree Molds for Axial Expansion. Used with straight legs to mold seal
- PRS594-180CL-780
- 7.8" (198.12 mm) for axial expansion ovals and circles. Minimum circular size is 15.616"(396.64 mm) CL