PRS598
PRS598 is similar to the PRS591 profile, but without the bead. This cross section is designed to snap into a mating retention system (see retainer tab) and can cover a large gap over a relatively narrow profile width.
Profile Details
Style S
Dimensions Width 0.687 (17.4498) Height 0.500 (12.7) Gap 0.250 (6.35)
Drawings PDF DWG SAT Standard Operating Pressure Minimum 10.00 psi (0.690 bar) Maximum 35.00 psi (2.413 bar)
Boot Dimensions A 1.500 (38.100) B 2.250 (57.150)
Minimum Straight Length 4.000(101.600)
-
Radial Expansion Out
(D is constant)
D = 10.000 (254) -
Radial Expansion In
(OD is constant)
D1 = 10.000 (254) -
Axial Expansion
(CL is constant)
D2 = 6.000 (152.4) -
Radial Expansion Out
(D is constant)
R = 5.000 (127) -
Radial Expansion In
(OD is constant)
R1 = 5.000 (127) -
Axial Expansion
(CL is constant)
R2 = 2.000 (50.8)
Materials
Standard Materials
E603A (C/U)
60 Durometer EPDM for High Quality, High Flex Life Applications (For All Configurations)
Special Materials (Special Setup Charges May Apply)
36B07 (C/U)
60 Durometer High Quality Black Neoprene (For All Configurations)
47A09 (C/U)
60 Durometer Nitrile Designed for Chemical Resistance and High Cycle Life (For All Configurations)
E6A53 (C/U)
60 Durometer Black FDA-Compliant EPDM With Excellent Flex Life (For All Configurations)
S55202 (C)
55 Durometer Gray, FDA-Compliant Silicone Molding Compound (For All Configurations)
Air Connectors
AC2 Reinforced Hose with Crimped Ferrule Adapter
ACFIT Hose Fittings
PI KF03-02 PSMale 1/8-27 NPT Fitting
PDF
AC14 Threaded End Connections
TYPE3.AC14E.PRV8426.904End Connector
PDF
Retainers
Tooling
90RCL
90 Degree Radiused Corner Molds for Axial Expansion. Used with straight legs to mold seal
- PRS591-90RCL-200
- 2" (50.80 mm) axial expansion radiused corners. Range of use = 2" (50.80 mm) to 4" (101.60 mm)
- PRS591-90RCL-300
- 3" (76.20 mm) axial expansion radiused corners. Range of use = 3" (76.20 mm) to 5" (127.00 mm)
- PRS591-90RCL-500
- 5" (127.00 mm) axial expansion radiused corners. Range of use = 5" (127.00 mm) to 7" (177.80 mm)
180CL
180 Degree Molds for Axial Expansion. Used with straight legs to mold seal
- PRS591-180CL-900
- 9" (228.60 mm) for axial expansion ovals and circles. Minimum circular size is 18" (457.20 mm) CL
360CL
360 Degree Circular Molds for Axial Expansion
- PRS598-360CL-600
- 6" (152.40 mm) axial expansion circular mold (CL)
- PRS591-360CL-550
- 5.5" (139.70 mm) axial expansion circular mold (CL)