PRS599
PRS599 is a popular molded, reinforced profile consisting of a sealing bead and dovetail base design. This cross section is designed to snap into a mating retention system (see retainer tab) and can cover a large gap over a relatively narrow profile width.
Profile Details
Style B
Dimensions Width 0.625 (15.875) Height 0.500 (12.7) Gap 0.375 (9.525)
Drawings PDF DWG SAT Standard Operating Pressure Minimum 10.00 psi (0.690 bar) Maximum 35.00 psi (2.413 bar)
Boot Dimensions A 1.500 (38.100) B 2.250 (57.150)
Minimum Straight Length 4.000(101.600)
-
Radial Expansion Out
(D is constant)
D = 10.000 (254) -
Radial Expansion In
(OD is constant)
D1 = 10.000 (254) -
Axial Expansion
(CL is constant)
D2 = 6.000 (152.4) -
Radial Expansion Out
(D is constant)
R = 5.000 (127) -
Radial Expansion In
(OD is constant)
R1 = 5.000 (127) -
Axial Expansion
(CL is constant)
R2 = 1.870 (47.498)
Materials
Standard Materials
E603A (C/U)
60 Durometer EPDM for High Quality, High Flex Life Applications (For All Configurations)
Special Materials (Special Setup Charges May Apply)
36B07 (C/U)
60 Durometer High Quality Black Neoprene (For All Configurations)
47A09 (C/U)
60 Durometer Nitrile Designed for Chemical Resistance and High Cycle Life (For All Configurations)
E6A53 (C/U)
60 Durometer Black FDA-Compliant EPDM With Excellent Flex Life (For All Configurations)
S55202 (C)
55 Durometer Gray, FDA-Compliant Silicone Molding Compound (For All Configurations)
Air Connectors
AC2 Reinforced Hose with Crimped Ferrule Adapter
ACFIT Hose Fittings
PI KF03-02 PSMale 1/8-27 NPT Fitting
PDF
AC14 Threaded End Connections
TYPE3.AC14E.PRV8426.904End Connector
PDF
Retainers
Tooling
90RCL
90 Degree Radiused Corner Molds for Axial Expansion. Used with straight legs to mold seal
- PRS599-90RCL-188
- 1.875" (47.62 mm) axial expansion radiused corners. Range of use = 1.875" (47.62 mm) to 2.875" (73.02 mm)
- PRS599-90RCL-150
- 1.5" (38.10 mm) axial expansion radiused corners. Range of use = 1.5" (38.10 mm) to 2.5" (63.50 mm)
180CL
180 Degree Molds for Axial Expansion. Used with straight legs to mold seal
- PRS599-180CL-350
- 3.5" (88.90 mm) for axial expansion ovals and circles. Minimum circular size = 7" (177.80 mm)
360CL
360 Degree Circular Molds for Axial Expansion
- PRS599-360CL-850
- 8.5" (215.90 mm) axial expansion circular mold (CL)